15 days old

Production Worker (NDT Utility Worker - 3rd Shift)

Howmet Aerospace
Dover, NJ 07801
  • Job Code
    300000964073821
About Howmet Aerospace

Howmet Aerospace Inc., headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company's primary businesses focus on jet engine components, aerospace fastening systems, and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. With nearly 1,150 granted and pending patents, the Company's differentiated technologies enable lighter, more fuel-efficient aircraft to operate with a lower carbon footprint. For more information, visit www.howmet.com

Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .BASIC QUALIFICATIONS
This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Verification of employment eligibility will be required at the time of hire.
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position;
High School diploma or GED from an accredited institution;
No relocation benefit is offered for this position. Candidates residing within a 50 miles radius of Dover NJ will only be considered.

PREFERRED QUALIFICATIONS
Ability to communicate effectively (verbal and written)
Must be able to work flexible hours including night and weekends with little advanced notice

PHYSICAL DEMANDS/EQUIPMENT USED
Equipment used will include but not limited to, CMM machines, various hand tools (such as belt guns, grinders, belt stones, and press), blast cabinet, borescope, spray guns, black lights, ovens, wash machines, processors, reading lights, marking units, and computers
Frequent pushing, pulling, and lifting of up to 25lbs
Frequent walking and standing

Disclaimer
The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.BASIC QUALIFICATIONS
This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Verification of employment eligibility will be required at the time of hire.
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position;
High School diploma or GED from an accredited institution;
No relocation benefit is offered for this position. Candidates residing within a 50 miles radius of Dover NJ will only be considered.

PREFERRED QUALIFICATIONS
Ability to communicate effectively (verbal and written)
Must be able to work flexible hours including night and weekends with little advanced notice

PHYSICAL DEMANDS/EQUIPMENT USED
Equipment used will include but not limited to, CMM machines, various hand tools (such as belt guns, grinders, belt stones, and press), blast cabinet, borescope, spray guns, black lights, ovens, wash machines, processors, reading lights, marking units, and computers
Frequent pushing, pulling, and lifting of up to 25lbs
Frequent walking and standing

Disclaimer
The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.Howmet Dover Casting is a world-class supp of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets.

Howmet Aerospace is currently looking a NDT Utility Worker to join our Howmet Casting located in Dover, New Jersey. The work hours for this Midnight Shift position are Sunday - Thursday 10:30PM - 6:30AM.

New Hire Starting Hourly Rate: $21.58; After 12 Months: $23.92

Position will receive an hourly \"shift premium\" while assigned to an off-shift

Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership.

JOB SUMMARY
POSITION OVERVIEW
This position will fill in gaps in labor for the hourly positions across the NDT Departments. The Utility worker is responsible for performing any NDT Operation Job (up to Level 2).

ENVIRONMENTAL HEALTH & SAFETY RESPONSIBILITIES
Expected to assist in the implementation of Howmet Aerospace's EHS value and policy statement and its accompanying principles;
Comply with all department, facility, Corporate and Regulatory EH&S regulations.
Wear all required personal protective equipment;
Report all job-related illness and injuries. (Per employee handbook);
Report all Safety, Health & Environmental concerns to your supervisor in a timely manner;
Attend all EH&S training.

JOB RESPONSIBILITIES
Essential Job Functions
CMM operations include: Operates jobs to be run on CMM machines, run programs on CMM machines and interpret results with regards to rework or acceptance criteria, verify calibrations stickers prior to running jobs, while maintaining all necessary quality records. Problem solving skills to identify and report problems. Operate various hand tools to perform rework on castings. Stage incoming queues for next shift.
Weld operations include: Operate various hand tools to perform weld prep (route out) and weld blend, operate boroscope to perform internal inspection of castings.
FPI operations include: Including, but not limited to, FPI dispatching and assist on the line when needed. Load the incoming FPI queues.
X-Ray operations include: Process exposed film into processors, load/unload cassettes with new film and lead for X-ray Level 1s, sort processed film into respective envelopes and verify film densities, inspects x-ray film for required density and sensitivity based on prior training, experience and resulting certification. Perform basic TPM and/or maintenance activities including but not limited to, cleaning of processors and basic maintenance.
Pack operations include: Verifies that all castings received have completed all previous operations per the lot router, verifies all necessary information in regards to heat batches, markings, and alloy code is acceptable, performs various marking operations including but not limited to, electrolytic etch, ink stamp, dot peen marking, and vibropeen, packages marked castings into shipping containers. Additionally, performs set-up operation for x-ray department and operate airflow testing equipment.
Submits to and must pass visual acuity test and after sufficient training, a written and oral certification examination.
May be asked to train in other areas of the plant.
Maintains work area in a clean, orderly, and safe condition. Follows all safety rules.
Maintains 98% reliability from audits.

JOB SPECIFICATIONS
Other Skills/Abilities
Must be able to read, write, and speak English
Proficiency of basic mathematical skills and aptitude to conceptualize 3D
Good working knowledge of basic computer operations
Must be able to work independently with good decision-making skills
Attention to detailHowmet Dover Casting is a world-class supp of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets.

Howmet Aerospace is currently looking a NDT Utility Worker to join our Howmet Casting located in Dover, New Jersey. The work hours for this Midnight Shift position are Sunday - Thursday 10:30PM - 6:30AM.

New Hire Starting Hourly Rate: $21.58; After 12 Months: $23.92

Position will receive an hourly \"shift premium\" while assigned to an off-shift

Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership.

JOB SUMMARY
POSITION OVERVIEW
This position will fill in gaps in labor for the hourly positions across the NDT Departments. The Utility worker is responsible for performing any NDT Operation Job (up to Level 2).

ENVIRONMENTAL HEALTH & SAFETY RESPONSIBILITIES
Expected to assist in the implementation of Howmet Aerospace's EHS value and policy statement and its accompanying principles;
Comply with all department, facility, Corporate and Regulatory EH&S regulations.
Wear all required personal protective equipment;
Report all job-related illness and injuries. (Per employee handbook);
Report all Safety, Health & Environmental concerns to your supervisor in a timely manner;
Attend all EH&S training.

JOB RESPONSIBILITIES
Essential Job Functions
CMM operations include: Operates jobs to be run on CMM machines, run programs on CMM machines and interpret results with regards to rework or acceptance criteria, verify calibrations stickers prior to running jobs, while maintaining all necessary quality records. Problem solving skills to identify and report problems. Operate various hand tools to perform rework on castings. Stage incoming queues for next shift.
Weld operations include: Operate various hand tools to perform weld prep (route out) and weld blend, operate boroscope to perform internal inspection of castings.
FPI operations include: Including, but not limited to, FPI dispatching and assist on the line when needed. Load the incoming FPI queues.
X-Ray operations include: Process exposed film into processors, load/unload cassettes with new film and lead for X-ray Level 1s, sort processed film into respective envelopes and verify film densities, inspects x-ray film for required density and sensitivity based on prior training, experience and resulting certification. Perform basic TPM and/or maintenance activities including but not limited to, cleaning of processors and basic maintenance.
Pack operations include: Verifies that all castings received have completed all previous operations per the lot router, verifies all necessary information in regards to heat batches, markings, and alloy code is acceptable, performs various marking operations including but not limited to, electrolytic etch, ink stamp, dot peen marking, and vibropeen, packages marked castings into shipping containers. Additionally, performs set-up operation for x-ray department and operate airflow testing equipment.
Submits to and must pass visual acuity test and after sufficient training, a written and oral certification examination.
May be asked to train in other areas of the plant.
Maintains work area in a clean, orderly, and safe condition. Follows all safety rules.
Maintains 98% reliability from audits.

JOB SPECIFICATIONS
Other Skills/Abilities
Must be able to read, write, and speak English
Proficiency of basic mathematical skills and aptitude to conceptualize 3D
Good working knowledge of basic computer operations
Must be able to work independently with good decision-making skills
Attention to detail





Posted: 2022-06-17 Expires: 2022-07-16
Sponsored by:
ADP Logo
Sponsored by:
Bank of America Logo

Featured Jobs[ View All ]

Featured Employers

Before you go...

Our free job seeker tools include alerts for new jobs, saving your favorites, optimized job matching, and more! Just enter your email below.

Share this job:

Production Worker (NDT Utility Worker - 3rd Shift)

Howmet Aerospace
Dover, NJ 07801

Join us to start saving your Favorite Jobs!

Sign In Create Account
Powered ByCareerCast